gbpc6005 thru gbpc610 document number 88613 08-jul-05 vishay general semiconductor www.vishay.com 1 case style gbpc6 ~ ~ ~ ~ glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 6 a v rrm 50 v to 1000 v i fsm 175 a i r 5 a v f 1.0 v t j max. 150 c features ul recognition file number e54214 ideal for printed circuit boards typical i r less than 0.5 a high surge current capability high case dielectric strength 1500 v rms solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for power supply, home appliances, office equipment, industrial automation applications mechanical data case: gbpc6 epoxy meets ul-94v-0 flammability rating terminals: silver plated (e4 suffix) leads, solderable per j-std-002b and jesd22-b102d polarity: as marked, positive lead by belevled corner mounting torque: 10 cm-kg (8.8 inches-lbs) max. recommended torque: 5.7 cm-kg (5 inches-lbs) maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols gbpc 6005 gbpc 601 gbpc 602 gbpc 604 gbpc 606 gbpc 608 gbpc 610 unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms bridge input voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward t c = 50 c (1)(2) rectified output current at t a = 40 c (3) i f(av) 6.0 3.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 175 a rating for fusing (t < 8.3 ms) i 2 t 127 a 2 sec operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88613 08-jul-05 gbpc6005 thru gbpc610 vishay general semiconductor electrical characteristics ratings at 25 c ambient temper ature unless other wise specified. thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) bolt down on heat-sink with silicone thermal compound betw een bridge and mounting surface for maximum heat transfer with #6 screw (2) unit mounted on 5.5 x 6.0 x 0.11" thick (14 x 15 x 0.3 cm) al. plate (3) unit mounted on p.c.b. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads ratings and characteristics curves (t a = 25 c unless otherwise noted) parameter test condition symbols gbpc 6005 gbpc 601 gbpc 602 gbpc 604 gbpc 606 gbpc 608 gbpc 610 unit maximum instantaneous forward voltage drop per leg at 3.0 a v f 1.0 v maximum dc reverse current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4.0 v, 1 mhz c j 186 90 pf parameter symbols gbpc 6005 gbpc 601 gbpc 602 gbpc 604 gbpc 606 gbpc 608 gbpc 610 unit typical thermal resistance per leg (1) r ja r jc 22 7.3 c/w figure 1. derating curve output rectified current temperature (c) average forward output current (a) 0 50 100 150 0 2.0 4.0 6.0 8.0 case temperature, t c heatsink mounting 5.5 x 6.0 x 0.11" thk (14 x 15 x 0.3 cm) al. plate 60 h z resistive or inductive load ambient temperature, t a p.c.b. mounting 0.375" (9.5 mm) lead length figure 2. maximum non-repetitive peak forward surge current per leg number of cycles at 60 h z peak forward surge current (a) 1 10 100 50 75 100 125 150 175 200 1.0 cycle t j =t j max. single half sine-wave
gbpc6005 thru gbpc610 document number 88613 08-jul-05 vishay general semiconductor www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward characteristics per leg figure 4. typical reverse leak age characteristics per leg instantaneous forward voltage (v) instantaneous forward current (a) 10 0.4 1.0 1.8 0.01 0.1 1 100 0.6 0.8 1.2 1.6 1.4 t j =25c pulse width = 300 s 1% duty cycle percent of rated peak reverse voltage (%) instantaneous reverse current ( a) 0 20 40 60 80 100 0.1 1 10 100 t a = 125 c t j =25c t j = 100 c figure 5. typical junc tion capacitance per leg figure 6. typical transient thermal impedance per leg reverse voltage (v) junction capacitance, pf 0.1 1 10 100 10 100 1,000 50 - 400 v 600 - 1000 v t j =25 c f = 1.0 mh z vsig = 50mvp-p t, heating time (sec.) transient thermal impedance (c/w) 0.01 0.1 1 10 100 0.1 1 10 100 hole for #6 screw 0.158 (4.01) 0.142 (3.61) dia. 0.128 (3.25) 0.048 (1.22) 0.200 (5.08) 0.160 (4.06) 0.750 (19.05) min. 0.040 (1.02) typ. 0.094 (2.4) x 45 degrees 0.445 (11.30) 0.405 (10.29) 0.630 (16.00) 0.590 (14.98) ac ac polarity shown on side of case: positive lead by beveled corner 0.445 (11.30) 0.405 (10.29) 0.630 (16.00) 0.590 (14.98) dia. 0.042(1.07) 0.038(0.96) case style gbpc6
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
